New Life Games LLC

**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: Andys35 on August 01, 2014, 05:51:16 PM

Title: Wms Help Needed Version 2 :)
Post by: Andys35 on August 01, 2014, 05:51:16 PM

Hi all.


My ticket printer is working great. When i push button to collect winnings printed ticket come out as it is. After than if i  try to put it BV to use it in a game again my BV doesnt accept it. What do i have to do ?


The other thinks is on the attached picture there is WMS logo and another part below that. I am seeing on the internet these 2 places always with lights. How can i setup bulps or lightning parts there ?


Thanks for the help.

Title: Re: Wms Help Needed Version 2 :)
Post by: rickhunter on August 01, 2014, 06:16:42 PM

To get the bv to accept the ticket and have the machine validated you need to install a tito board inside.  There are some you can make up yourself with some electronics knowledge and there are a couple that are already done, you just have to install in a machine and configure it.

As far as the lit up parts.  The WMS part was used for the denomination, these were never lit up.  The other part is lit up by a compact flourescent bulb that is behind the glass.  I am assuming you have a mechanical reel machine since I see part of the little monitor on your picture.

Title: Re: Wms Help Needed Version 2 :)
Post by: Andys35 on August 01, 2014, 07:15:05 PM

Hi Rickhunter. Thanks for your reply.

[size=78%]Yes i bought it with mechanical. I saw at the casino that small Wms logo with lit and other one too. For that reason i asked is there any lit parts that i dont know. [/size]



For the next one i dont know about tito board and how to configure. Would you give me some example what i need and how i can configure.


Thanks.

Title: Re: Wms Help Needed Version 2 :)
Post by: Andys35 on August 01, 2014, 07:28:21 PM

Do you want me to post pictures inside of my Wms ?

Title: Re: Wms Help Needed Version 2 :)
Post by: qbert on August 01, 2014, 08:57:24 PM

http://newlifegames.net/nlg/index.php?topic=20544.0 (http://newlifegames.net/nlg/index.php?topic=20544.0)

Title: Re: Wms Help Needed Version 2 :)
Post by: Andys35 on August 01, 2014, 09:48:35 PM

Hi all.


it seems i dont have tito. actually i will check tomorrow on daylight but during this waiting time if i dont have it Which Tito for Wms BB1 do i need.


Thanks.

Title: Re: Wms Help Needed Version 2 :)
Post by: rickhunter on August 01, 2014, 10:54:36 PM

Machines don't come with TITO boards unless you tell the dealer to install one.  If you buy a Tito board from Jim @ Bettorslots he can provide instructions on what to setup.  It is not all that difficult.  I've never seen the denomination square lit up on a BB1.  Maybe you saw a BB2 with it lit up?  all the BB1's I've seen only have a metal plate behind it.

Title: Re: Wms Help Needed Version 2 :)
Post by: Andys35 on August 01, 2014, 11:36:35 PM

Thanks rickhunter.


Pm send it to Jim. Waiting his response.


Thanks.