New Life Games LLC
Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Arcade Games **Video** => Topic started by: Bad A. Billy on April 04, 2014, 08:47:07 PM
-
Hello all,
I was hoping someone could help me with a controller wiring problem I have. This cab is a Sportstation 4 player cab with the 49way optical joysticks and uses the I40 board. Had problems with the SIO pcb and had to change the main cpu on it. My only problem now is that I have the 4 output wires from the I40 that control the joysticks leftover with nowhere to go. Everything works fine except for the sticks and in the switch test menu I can short them with the wires and they register just fine. I have the manual and wiring diagrams for everything but they don't show exactly where they plug into. Even with Google I cannot find anything that shows or tells me where these 4 short 5 volt green wires go in to. If anyone can point me in the right direction or shoot me some pix of the inside of their control panel I'd be forever grateful!
TIA!
Bill
-Yes, I did take photos of everything before I re-wired it. Luckily I missed that end of the harness I need to see...probably figured it would be too obvious to forget...