Homebrew Player Tracking and EFT Systems > NLG Homebrew Player Tracking and EFT Systems |
Arduino Based TITO System |
<< < (2/6) > >> |
foster:
Here is one of the fully assembled boards. I had to put 2 of the Max232 caps on the solder side since I messed up the layout on these the final version will have all 4 caps correctly placed. I also found out I didnt leave enough room for the caps as well. I had to adjust the schematics and board layouts to allow for small electrolytic capacitors |
747builder:
Foster, Very nice. hope you socket the IC's in case they go bad or are bad before soldering into the board, be easy to change out later. |
foster:
The ATMega328 is in a socket So I can change someones message if they like. I do not want a firmware snafu ruining a board either. |
DocPaul1:
Mr. Foster: I saw the Utube video of your scrolling "Welcome" message. Is that public domain or is it your propriety sketch ?? If public, could you send me a copy for my 1602 Arduino system ? Thank you in advance. Doc. |
MartinS:
Hello guys I know this is an old topic but pardon me. I am looking for some pointers to making a physical connection between an IGT S+ machine and an Arduino for serial comms. Thanx in advance. |
Navigation |
Message Index |
Next page |
Previous page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |