**Video Poker, Keno, Slots, 21** Gaming machines > BALLY Game Maker |
Bally game maker v7000 bar top help |
(1/1) |
B_S:
So I picked up a Bally game maker V7000 bar top for $50 Has a coin hopper but no coin mech When I first got the machine would barley turn on Fixed a couple of bad Caps on the power supply And it would boot up I bought a clear chip for it cleared the game settings Had a coin hopper error (it would keep running backwards )took the coin hopper apart and got that error to disappear guessing it was a bad connection ? Haven’t been able to get the DBV-200 bill validator working just turns on runs for a bit and will take a bill in and just stop with the bill part way in tried $1 ,$5 , $10 , $20 , $50 bills with no luck All the dip switches are in the off position Is this an issue with the bill validator ? Or do I have something set up wrong ? Just kind of stumped with This machine |
B_S:
Forgot to put in the post Cleaned the bill head with glass cleaner didn't change anything Checked all the capacitor’s in the billhead all seamed fine Pulled all of the connectors in the machine and reseated them all since it looked like a mouse or rat was in the machine at some point in the past The attached photo was where all the dip switches were originally on the DBV bill validator |
B_S:
I picked up a few more game makers Tested the bill validator and it works in the other machines So I guessing it’s a power supply issue/bad MPU ? |
B_S:
Got it working Figured it out Had a bad bill transport |
Navigation |
Message Index |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |