New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Clawsino on January 25, 2017, 08:28:34 PM
-
I have an S+ machine here, haven't used it in awhile, it did work before. turned it on and the battery was dead. I replaced the battery and now I have an error 67 that I cannot seem to clear. I've tried opening and closing the door as well as powering off and on and holding the test switch, which ends up getting me into the settings. Any other ideas?
-
Make sure the battery voltage is getting to the RAM chip.
With power off read the voltage across the capacitor just north of the RAM chip, which is just to the left of the program memory IC.
It should read a little over 3 VDC.
-
i got 3.6v at the batter and 3.4v at the capacitor. what else could i check? possible bad door sensor? any way to test those?
-
got it fixed, turns out it was the sensor on the door