New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Cashen87 on February 01, 2017, 04:11:53 AM
-
Hello. I have a igt s plus 3 coin slot machine. I wondering how I can get all the lights to light on the panel. See pitcher. Last igt s plus machine I have you could use the spin reels button all time or handel whit the credit on the machine.
-
The buttons will only be lit when they are active to be pushed. On most S+ machines, the Spin Reels button is only lit after a coin has been inserted or a credit wagered.
A limited number of SP chips allowed the Spin Reels button to be configured to act as a "repeat bet" button, which would result in the button being lit even when a credit hasn't been wagered. That would be the only way to have the button lit all the time (assuming there are credits on the machine) (other than messing with the wiring to provide voltage to it).
See what SP chip is in the machine with the behavior you like, and we can tell you if that SP chip is compatible with the game you want to change.
-
I have SP 1271 in the machine
-
I have read you can use SP 1137 to use the spin reels button or handel to repat bet, if iam not wrong :Scratch-Head:
-
You are correct. The SP1137 does let you do both of those along with allowing you to set a value to each coin inserted. When the machine is "tokenized" each coin can be set to a value from 1 to 99. I have a machine set at 99. Each quarter I put in gets 99 credits. So if the repeat bet feature is something you want, SP1137 will do it.
Dave
-
Okey. Where can I get this SP 1137 chip from. I have 2 igt s plus machine at home I will have that SP 1137 chip to
-
Will the SP chip 1137 work on S+?
-
Cashen87, you sent me a pm about using a non electronic acceptor on your machine. you in box is full so I could not respond. I will post the information here.
Yes, you can remove Q-4 and this will allow you to use a mechanical acceptor, Like a IMONEX plastic coin acceptor. WARNING WARNING, some people have mistaken the component labeled Q-4 as the one to remove. there are three IR receivers on the board, they line up with the holes in the black encoder so the IR emitter beam can pass through the encoder and hit the receiver. one of the three is labeled Q-4, DO NOT REMOVE THIS COMPONENT. the component you want to remove is a small surface mounted transistor located near a flat IC chip. there were two styles of boards used by IGT, on the one version the transistor was labeled Q-2, on the later version it was labeled Q-4. this is the component you want to remove. you can usually use a small pair of pliers and slightly twist the device and it will come right off, check to make sure none of the soldered "legs" remain and touch each other. sounds a little more difficult than it really is, very easy and simple to do. JUST MAKE SURE YOU REMOVE THE RIGHT Q-4.
Jim
-
Any one know about the sp game chip 1137 works on igt s+?
-
Yes ALL SP chips are for S+ machines. You will also need a SET86 chip in order to set the token value. You will need both chips in order to do what you want done.
-
I see. I need the set 086 chip to get my machine to play repeat fore the spin reels button and handel?
-
Here is one possible source for the Set chips you need. You can contact this seller and see if they have them and what is price:
http://jjslots.com/S-Plus_c19.htm (http://jjslots.com/S-Plus_c19.htm)
There are probably merchants here on NLG that can also provide them, check the homepage for a list of vendors and their contact information:
http://newlifegames.com/nlg/index.php (http://newlifegames.com/nlg/index.php)
-
I have contackt this seller on ebay about the chips. Hi dont know about the option on the respin on sp 1137 chip
-
Anyone have this chip fore sale 2x sp 1137 and the set 86
-
I have contackt this seller on ebay about the chips. Hi dont know about the option on the respin on sp 1137 chip
The seller doesn't need to know about the option, we have been told the SP1137 has that option by informed people here. So just purchase the SP1137 from anyone that has it for sale.
-
Anyone have this chip fore sale 2x sp 1137 and the set 86
I have them. Your in box is full.
-
Okey. Where can I get this SP 1137 chip from. I have 2 igt s plus machine at home I will have that SP 1137 chip to
Do both of your machines have the SP1271 game chip in them now? If so, the SP1137 will work for both. If not, what is the SP chip in the second game? It may require a different SP chip to get the repeat bet feature. I don't want you to buy 2 of the same chips, if it won't work in both of your games.
Dave
-
Yes. Both of my igt s plus machine have the SP1271 game now
-
So then I need 2x SP 1137. One to double, double diamond and red, white and blue wild star
-
So then I need 2x SP 1137. One to double, double diamond and red, white and blue wild star
Yes you will need 2 SP1137 and 1 Set 86. That should do both of your games. Both are type 0 games ans SP1137 works for those.
Dave
-
I have order 2x SP 1137 and Set086 from JJ slots :propeller:
-
Hello. What i have to do when I use this SET086 fore the SP 1137 chip to work? :Scratch-Head: