Bill Validators, Currency Acceptors and Printers > JCM DBV-45, DBV-145, and DBV-200 Bill Validators |
DBV-200 SH Bill Validator for a V5500 |
(1/1) |
David Walz:
Just to inform people about my adventure with my 1995, V5500, and maybe this will benefit others. The original DBV-45 SH from 1995, will not work on the new US bills, we all know about that problem. :duh: So I been running around in circles trying to figure out what to do with it, since all these bill validators are getting really difficult to locate. :banghead: What I didn't know was that two different models, the DBV-200 SH for Bally and DBV-200 SS for IGT. The Bally bill entry slots protrudes out (duck bill). Once I located a DBV-200 SH for the Bally, I learned that the DBV-45 SH has a circuit board #AS-3356-202, which also plugs into the DBV-200 SH, which maybe a no brainer for some people, however I forget about this AS-3356-202. :Scratch-Head: |
David Walz:
This is the AS-3356-202. Be extra careful in plugging the connections into the sockets, they are easily buggered up. :nerd: I was fortunate enough to have guidance from Tim, at Sunrise Side he sent me the correct DBV-200 SH for the Bally V5500, and it works excellent. :applause: :woot: Important note: be sure you reset the bill validator after you are done. |
Navigation |
Message Index |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |