New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: AZviejo on June 28, 2023, 05:18:24 PM
-
bill validator on my S2000 (Triple Butterfly Sevens) will not pull the bills or tickets in (I have TITO). it just pulls them in a ways then it slips and slips and doesn't kick the bill back out all the way. It appears to be belt slippage big time.
What should I do to either clean the belts and get them gripping again, or are replacement belts available and if so, who may have them?
Thanks in advance
Mark :EmoticonHelp4:
-
Its the o rings in the head that need replacing , rarely the belts, remove head and take off cover and opto board then remove c clips on axle with 4 o rings and replace
-
Its the o rings in the head that need replacing , rarely the belts, remove head and take off cover and opto board then remove c clips on axle with 4 o rings and replace
You were correct, Sir. I changed the O rings and it now works perfectly. Thank you for your sage advice!
mar