New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: lazzerjett on March 25, 2024, 02:50:51 PM
-
Hello all,
I have been looking for a new fan for my NXT-2 CPU. It has 3 wires is 40x40x10mm and has a very small connector. All the fans I have found either do not show any dimensions for the connector and end up being 8+mm wide or doesn't have a connector at all. The connector on the one I am replacing is around 5.2mm wide. Spin says they have it but when I look at the picture it looks like the larger connector. I would appreciate any help locating the correct (not gold plated) one. I also noticed that the 10mm thickness could be 20mm and easily still fit.
-
Is this what your lookin for? This is the CPU fan.
-
Yes it is.
-
Sending one out to you today Tim
-
Awesome thank you very much. Such a great guy.
-
I'm very new to the forum (though I have been reading as a guest for a bit) as I got a BB2 not long ago. Is there a good place to get spares for these since it has the very small (and apparently obsolete) connector? I was able to take a new CPU fan and cut the broken old fan off, strip the wires on the connector and the new fan, and solder them together. This is working fine, but if there is a good place to get some spares, I'd love to hear about it.