New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT Fortune 1 Sircoma/Poker => Topic started by: Quiglag on July 13, 2015, 12:39:31 PM
-
I was given a Sircoma sg-103 Draw Poker Machine and it is in pretty good condition other then some corrosion on one of the three Bally Computer Cards. Card #1 (400715) has a NiCad battery that corroded and did some damage to the traces.
I don't think I would be able to find a replacement board seeing as I can hardly find any information on the machine itself. What would be the best way to clean the traces? And once clean would I be able to jump the damaged traces with small wire?
Thanks
-
Dont be so sure that you will not find that board. Although the Fortune 1 parts are rare they are still out there. Post a classified ad if you are a contributing member. I dont think that I have an extra board but I may know someone who might have one. PM me if you have not luck with the classified ad.
Ra
-
Thanks, but I don't even think my machine is technically a Fortune 1. I believe what I have pre-dates the Fortune 1. I am not sure how similar the two machines are.
-
Hi! I have the same sigcoma sg103 as in the picture. I have it working except some switch lights and I haven’t seen the light/bell fire off yet. Manufactured boards Dec 1979! That is super old! Almost as old as me! Did you ever get ahold of a manual? Tony
-
Just noticed thie original post was from 2015.
Not a lot of documentation on these. Nothing in the file system?
If you go to IGT, there is a sub category for Sircoma near the bottom. There are a few manuals that have schematics.
Chris