**Video Poker, Keno, Slots, 21** Gaming machines > Scientific Games (TwinStar, ArgOS)
Bally Alpha 2 Pro V27 Argos
JConti1971:
Having issue getting installer to take after battery change. It’s booting to NVRAM error which is normal.
This is an ArgOs machine with BIOS ABIP02402112A, im using installer AIN0000213A. When i boot to the USB I get a message that States. “Boot Device must contain a soft-image and not be sector copied”
Then it halts.
Anyone have experience with this.
rickhunter:
AIN 213A is not an ARGOS installer. It is an OS loader. The installer is AIN000000x (the x is usually a single capital letter between "A" and "L" although there might be something newer than "L". So you need to boot with that and the AIN213.
JConti1971:
I suppose I used the wrong choice of words. I need the OS loader to clear the machine after battery change. There is a game already on it.
idesign:
Actually AIN213A is an early installer. The newer ones do have a single letter though. This sounds like you are not using a OEM USB drive to clear NVRAM.
Since the installer is not working, you can just boot up with the logic door open on the CPU and it will get you to a NVRAM clear and persistent data screen. You can do both on that screen and continue to the setup menu for the game you already have installed.
JConti1971:
I have the correct USB drive coming. Meanwhile I did boot with the CPU door open, and after the whole boot it still ends up saying
SYSTEM FAULT
OS::NVRAM is corrupt and cannot be recovered
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |