New Life Games LLC
**Reel Slots** Gaming Machines => IGT S3000 Reel Games => Topic started by: brettsrt on June 09, 2021, 06:32:20 PM
-
Anyone have any luck on a TITO for s3000 or where to hook it up to?
-
I have never seen inside a s3000 but I would look for a 5 pin COM1 port for data (should be pinned same as s2000, I-game, AVP, SAVP), and you should be able to get power from a usb port depending on which tito you have.
-
I have never seen inside a s3000 but I would look for a 5 pin COM1 port for data (should be pinned same as s2000, I-game, AVP, SAVP), and you should be able to get power from a usb port depending on which tito you have.
I have found a 5 pin header at the bottom of the backplane that is labeled J147 and looks exactly like the COM1 on the backplane of the AVP, however the pinout seems to either be different or this is not actually a RS232 port.
Has anyone else had any luck? Or know if a daughter card is absolutely required?
-
BHinkley's TITO@home supports S3000.
https://www.titoathome.com/ (https://www.titoathome.com/)
-
Yes you use that 5 pin same connector on the upper backplane right side, one configured for avp works for s3000 setup identically
I have never seen inside a s3000 but I would look for a 5 pin COM1 port for data (should be pinned same as s2000, I-game, AVP, SAVP), and you should be able to get power from a usb port depending on which tito you have.
I have found a 5 pin header at the bottom of the backplane that is labeled J147 and looks exactly like the COM1 on the backplane of the AVP, however the pinout seems to either be different or this is not actually a RS232 port.
Has anyone else had any luck? Or know if a daughter card is absolutely required?
-
I use Bettor Tito and it plugs into J50. Once you do that you will be good to go.