**Reel Slots** Gaming Machines > Bally Reel Games

S6000 no display

(1/5) > >>

olivier34:
hi,
i just buy s6000 silver and gold, and when i power on i have no display in front and red led on mps flash every second!
i change battery, because it is died and i clear ram but nothing!!!!
look my dip switch on board there all in 1, it is strange???????
what is good configuration for this?
any else ideas???

Sunrise Side:
Flashing red LED means there is an error on the MPU board. Did you remove any chips? Chips in the proper direction? I would remove U28 and U43 and look for bent legs on the chips. Check the edge connector of the board for bent pins as well. If you find a chip in the socket that is in backwards , most likely the chip is burnt/toast.

Badbaud:
DSW2 should have some switches on and some off to set the proper options, DSW3 should have all switches on.

olivier34:
thanks,
but every chips is in good condition, legs are good,everything look great!
peraphs ship are burned???
i have no idea!!!
do you thinks i need change mpu, or just ship u-28, u-43???

Badbaud:
send to my shop for test and repair?

Navigation

[0] Message Index

[#] Next page