Bill Validators, Currency Acceptors and Printers > JCM DBV-45, DBV-145, and DBV-200 Bill Validators |
Bill validator question |
(1/4) > >> |
hawkypro:
Alright, Got my parts for the hoppe on the Triple Diamond machine to convert it to use quarters. Works like a champ now :applause: . ( thanks Roz) Everything is working - payouts are correct, sounds are good ect....with the exception of the bill validator not taking bills. I dont know if this function has not been enabled or not. It does go through the boot up with no problems when i start the machine. So where do i start to see if its enabled.. :talktothehand: Found a thread on this matter, I will tread through that first and see where I get. Hawkypro |
rickhunter:
You need a set chip to enable the validator on an S+. |
hawkypro:
Thats the question I guess, is there a way to check to see if its enabled already? |
rokgpsman:
Did you try a $1 bill, face up insertion? That's the best bill to use to prove BV is working or not since it eliminates the question of old software in the BV causing the new-style bills to be rejected. Also, does the BV pull the bills in and then rejects them back out - or does it not even pull them in? |
hawkypro:
It wont even pull it in. |
Navigation |
Message Index |
Next page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |