**Video Poker, Keno, Slots, 21** Gaming machines > Aristocrat Video Gaming Machines
Aristocrat MK-6 no lockups. BV Cycles but Red lights- SOLVED
slotmachineparts:
All games came from a casino. Were on the floor. Only 6 months old. The casino bought them refurbished from Aristocrat.
Was able to clear the errors, however now I can't get the machine to accept bills. I have no current lockups. I have switched bill validators a couple times still no success. The BV do cycle, however, just show up with red lights.
JCM UBA 10 V2.07-25
Set Chips Used:
06.03.20-U3 Series 01 M27v800 MK6USA 13D163A0
&
06.03.20-U2 SERIES 01 M27v800 MK6USA 3CF90UD9
SYSTEM BASE:
01.04.16-u70 SERIES 01 M27V160 E804C710
&
01.04.16-U83 SERIES 01 M27V160 MK6USA 4A13D11B
BettorSlots:
Take a look in the top box and see if the player tracking board is still plugged in. Just disconnect any of the harnesses that are plugged into it. After that do a clear and set it up again. I had the same issue on a couple that I shopped and that fixed the problem.
slotmachineparts:
I appreciate the response. I just tried that. Have the same issue. BV Light is still RED.
BettorSlots:
Check comm wires leading from BV hub to back plane for damage. Is this a known working BV...do you have another one to try?
slotmachineparts:
Everything looks good. BV Cycles, did test in bv and accepts bill. Can not test in diagnostic, however.
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |