New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: JethroP on December 30, 2020, 02:28:29 PM
-
I just acquired my first Video poker machine. The MPU is AS-3356-246 and is very corroded around the battery. Is there a schematic and parts list available so that I might try to repair this board?
-
Hey, did you manage to repair the board? I have a V7000 GameMaker that has been storage for 12/13 years, battery has leaked and corroded so that corner of the board is in a need of repair, looks like I need to replace a bunch of resistors and a couple of capacitors. Did you get a schematic or good photos of a working board?
Cheers
Gary
-
No...I still have the old corroded board. Same as you. Still could use a schematic and board layout.
-
First douse with 50% white vinegar and 50% distilled water, rinse and repeat until all acid is gone.
-
First douse with 50% white vinegar and 50% distilled water, rinse and repeat until all acid is gone.
I did that long ago. The problem is I need a schematic and board layout to repopulate the destroyed parts.
-
I think this is what you're looking for.
-
I think this is what you're looking for.
Thank you. I think that is it. That machine is on the back burner for now, but will look into fixing it in the coming months.
-
The schematic is exactly what I needed, about to order the resistors and capacitors to replace, thanks a lot, much appreciated.
Gary
-
Glad to help. I hope you're able to get it working again :cool_thumb_up: