**Reel Slots** Gaming Machines > Bally Reel Games
Bally E2212 3rd reel won't stop and causes "tilt"
JohnR:
Hi, I have an E series 2212 by bally. Everything tests out fine but it does the non stop 3rd reel thing. I run the self checks/tests and all seems good. All reels spin freely, the optics are fine, and all clearances are fine.
Door switches are good also.
It will do fine for 1 or 2 pulls and then the dreaded tilt.
Sunrise Side:
Lubricate all the linkage in the reel assembly. Be sure to free up all linkage to a point where you are able to spin the 2 black cross shafts easily with just two fingers.
JohnR:
I did. The third assembly at the top was frozen. It still does it. It almost seems that there's not enough power to the coil. I checked the sensors. All are aligned and working. I confirmed this in test mode. I get different characters as I spin the reel.
The coils fire correctly while in test mode.
Hope this narrows it down some.
Sunrise Side:
Have you swapped reel readers to see if the problem follows the reader?
JohnR:
Yes
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |