Coin Comparitors and Other Coin acceptors > Coin Comparitors and Other Coin acceptors
Testing a CC-16 24v IGT
Badbaud:
It may be getting power, a good first step test, BUT is it producing a vend pulse.
In a Bally the COD board must see the vend pulse from the coin comparator or it will report a 21
error and tilt the game.
In a IGT the optic board below the coin comparator must see a vend pulse from the comparator
or a 21 error will be reported there.
The vend pin is where I connect my o-scope so I can see the narrow pulse but attaching a LED to the vend output will show a flicker on the LED verifying the vend pulse.
Navigation
[0] Message Index
[*] Previous page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |