New Life Games LLC

**Reel Slots** Gaming Machines => Bally Electromechanical => Topic started by: Brett on July 06, 2020, 02:40:48 PM

Title: Jackpot display add on.
Post by: Brett on July 06, 2020, 02:40:48 PM

Well I'm almost done. I need assistance though. I have an 809-B with the jackpot display belly glass. This has come apart and I would like to put some nickles in it. I took the two bottom screws out but that did nothing. Do you have to pull the door apart to get to it? I hope not. any help would be greatly appreciated.
 
Brett

Title: Re: Jackpot display add on.
Post by: 63mini on July 06, 2020, 02:55:55 PM

Brett,


 Take a look at the link below.  Scroll mid way down.  This should give you what you need.  Plus it's quicker then re-typing everything.  :yes:


 http://newlifegames.com/nlg/index.php?topic=27873.msg146840#msg146840 (http://newlifegames.com/nlg/index.php?topic=27873.msg146840#msg146840)

Title: Re: Jackpot display add on.
Post by: rdaniel on July 06, 2020, 04:19:24 PM

The belly glass is held in place by two screws about mid-way down the cabinet door, one on the right and another on the left. With those removed the belly plate should tilt out.

Title: Re: Jackpot display add on.
Post by: DavidLee on July 08, 2020, 08:09:01 PM

It’s possible that a few sugary drinks have been spilled on to the frame over the years.
And or the rubber cushion is stuck to the frame and the machine.
With the screws out, usually a part of the frame will move away from the door.