New Life Games LLC
TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Slot Toppers => Topic started by: slotdoofus on October 18, 2016, 02:44:10 PM
-
I bought a topper for a Bally S6000 a while back...finally getting around to installing it.
Which plug goes where?
I have a 4 pin plug marked LED controller.
I have another 4 pin plug marked tower interconnect
I also have a 2 pin plug marked game power.
This topper also came with a 12 to 24 VAC converter that has a potentiometer on the side of the box. What is this for and how is this connected in the installation?
The 12 to 24 VAC has 2 connectors...a 2 pin plug, and a 4 pin plug.
-
Were you able to figure this out? I got one and I'm reading I need 24v and a 6v power adapter to power thr lights up, but I'm not sure what amps they can be.
-
No,
I abandoned this project.