New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: WILDCHERRY21 on December 13, 2017, 07:32:40 PM

Title: WBA-13-SS Swap
Post by: WILDCHERRY21 on December 13, 2017, 07:32:40 PM

I have a brand new WBA-13-SS unit. I see its for a Bally from the code it has on the housing. I would like to use it in my S2000 machine. Is this possible?  If so how? Or is it for only Bally machines? Thanks.

Title: Re: WBA-13-SS Swap
Post by: RB on December 13, 2017, 07:48:13 PM

Yes if it is indeed a 13ss (eprom model), all you have to do is change the chip from ID003 to ID024. If it has a RS232 card on the side it would it will need to be removed. PM me if you need a chip.

Title: Re: WBA-13-SS Swap
Post by: WILDCHERRY21 on December 14, 2017, 04:00:37 AM

OK cool. The eprom chip in it is good to go. I switched it to a working BVD and it operated fine. This card you speak of. Is it the tan looking card with 1 screw in it with a wire harness hooked to it?

Title: Re: WBA-13-SS Swap
Post by: WILDCHERRY21 on December 14, 2017, 04:51:22 AM

Pic

Title: Re: WBA-13-SS Swap
Post by: RB on December 14, 2017, 05:40:45 AM

Remove that board on the side & plug the harness directly into the logic board. Change the chip & you're good to go.

Title: Re: WBA-13-SS Swap
Post by: WILDCHERRY21 on December 14, 2017, 05:49:27 AM

Awesome! Thank you very much  :applause: