New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM DBV-45, DBV-145, and DBV-200 Bill Validators => Topic started by: 63mini on July 29, 2018, 03:55:32 PM
-
I have a DBV200 download tool that I am trying to get up and running. The cable that is recommended to use only has one line on pin #5 of the interface connector. I would think it would need a transmit & receive line to flash it. So, I would like to see photo of what others are using. That way I can figure out if any issues are hardware, software or..... Me! :Tongue_Out:
Below is the harness plugged into the DBV-200. I also, attached a stock photo of the download tool from the DBV200 manual.
-
All it needs to do is receive.
The DIP switch settings tell it to receive.
MY DT104 has 2 wires so the CRC can be checked by sending a request to the head after downloading is complete, maybe your unit does not have that capability?