New Life Games LLC
**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: br549autosales on October 30, 2020, 08:04:16 PM
-
This is as far as I'm getting, could it be software or MPU related?
-
Pic
-
OS card is corrupt, or your bios is too old for what you are trying to load. Do you have SBOT2000 bios or SBOT1600?
-
SBOT2000
-
Bad OS card then, that is what partition validation failed means.
-
Ok I have a few other OS cards I can try, what is the proper one for this game card? For all I know the one that came with the machine was wrong or already bad
-
This is the OS card that came with the machine
-
That is the correct OS card, it is just failing validation.
-
Thanks, I'll go thru my stash of cards & see if I have another one, does it have to have the same exact numbers on it or are there variations of another OS card that will work with this game?
-
Just needs to be family A1.2 as stated on the stickers.
-
Ok I actually found another one but I don't have a regular BB1 clear card, will an NXT clear card work?
-
BB1 and NXT is the same thing. All BB1/NXT clears under 1810 are bb1 compatible.
-
Good to know, I wasn't sure about the clear cards
-
Just got this message trying to clear my machine
-
Probably need an older clear card like a 1350. 1810 works for a lot of machines but not all, in particular if you have the old green logic.
-
10-4, where could I get the correct clear chip?
-
Did you get your machine working? I have the same machine, and ran into an issue where it would not boot. After talking with a place in Nevada, (not sure of the place, lost contact info) he had said I need to clear memory and reset machine. I bought a NXT clear card online, was able to clear memory. Im not sure I'm setting all parameters correctly though. Now when the machine is loading, it gets to loading the game, then stops at a blue screen scrolling "Call Attendant". I'm not sure where to go from here. Im hoping I didn't wipe the program card when memory was cleared.
Any insight would be great.