New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Shameless707 on September 15, 2023, 06:26:18 PM
-
I've been looking for a replacement cable for the Seiko psa66st gen1 printer that came with my s6000. The previous owner decided to cut the cable from the 14pin molex on the bottom/backend of the printer. They left no remnants of the connector for the back pane, the even cut both cables to the power supply, although that was salvageable. Haven't had the greatest luck finding into on the gen1. Anyone know what the cables is supposed to have or look like? I have the snipped 14pin molex end, generally know what the connector for the bp(I think it's the spare 232) but is there more to the cable? I've seen many similar configurations but no clarity because they all say gen2. Any help would be appreciated