New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. => Topic started by: startek2 on May 05, 2015, 01:53:03 PM
-
Hey gang,
We just got this game in. It was working a few days ago when we ran it. Today I get a 'saferam corrupted' error.....i pulled the board and found the lithium battery to be totally dead.....i have replaced it.....
What I need to know is 1)what game/version is this? 2) what do I need to do to get the error resolved? So I need a chip? If so what chip and where does it go? This is my first video slot........Pictures are attached....oops the last pic is upside down...that was my not the game lol
-
It's a Bally Game Make. When you replace the battery on a Game Maker you need to run a clear chip in the P10 location with Dip Switch 1 switches 6,7, and 8 on.
You will then be told to remove the clear chip and reset the 3 switches to off.
When you turn the game back on you will be prompted to set up the game options again.
Things like type of door, is it a upright or slant machine, what kind of coin mech, etc. etc.
Somewhere on NLG is a post on what options need to be set.
-
This will get you going...if not, you will be real close. Make sure to adjust/change equipment as per your machine (I.e. coin Comparitor, validator, hopper, all the common sense stuff)...
Clear Chip Settings:
Jurisdiction - 5
Primary - SAS
Secondary - None
SAS version - 5.01
Cabinet - Upright
Coin Acceptor - None
Bill Validator - JCM WBA
Printer - Seiko
Hopper - None
Door - Pulsed Optic
Double Down - OFF
Tournament - OFF
EFT - Disabled
Secondary Dev - None
Residual Credit Mode - No Gamble No Attendant Pay
Win Evaluation Preference - Legacy
Program Settings:
Terminal ID - ANY 3 digits (111)
Serial # - ANY 6 Digits (111111)
Host Mode - EFT Disabled
Host Type - Standard
Host Bonus - Disabled
Progressive - Disabled
Validation Type - None
Remote Hand Pay - Disabled
Print Hand Pay - Enabled
Hand pay Exc - Unsecured
Comm Loss Tilt - Disabled
JRCM Control - Operator