New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Konami Games => Topic started by: Denny on October 15, 2015, 12:05:46 PM
-
I've got a Konami 1.5 slant top with the touchscreen error "451 TS Initial Fail" Manual says solution is reboot and turn reset key. I have tried this "eleventeen" times to no avail. I realize these are not popular machines, but anybody have any ideas ??
Thanks !
-
Hi,
Anybody have any ideas on this touchscreen error ? :thank_you:
-
Hey,
[/size]Just replaced monitor with 2 good working monitors with same error, so I'm guessing it's either in the plugs (harness) or one of the boards. Any other thoughts ?? :Scratch-Head: :duh:
-
Denny,
If you've had any of the boards out of the top box you may want to check for bent pins. If you have any boards from a working machine you may want to try a swap. Are you getting the error after a complete boot or during the boot?
Lin
-
It works ! Thanks Lin :thank_you: Swapped boards....... I pulled the IOAB and still had the error, next the IOBB, same error and of course the last COM board and that did it. Just for kicks I switched the communications eprom and that was the problem. Never had that before and never knew those eproms to go bad. Well, there is a first for everything. Anyway touchscreeh is working fine. Thanks for your help, it was a good idea to check the boards. :thank_you: