New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Bally EVO and EVO hybrid. => Topic started by: john398 on April 14, 2016, 07:35:00 PM

Title: Bally EVO switches locks bypassing
Post by: john398 on April 14, 2016, 07:35:00 PM

Almost got my system working funny think is I did not realized the software installed was blazzing 7's and the markings say beach party LOL


Anyway I have a bunch of door open errors and wondering if I can set microswitches to bypass them all

Title: Re: Bally EVO switches locks bypassing
Post by: john398 on April 16, 2016, 06:45:55 PM

getting further but looks like system door has an issue weather open or closed


here is the picture of the cherry switch, are they on the correct poles?

Title: Re: Bally EVO switches locks bypassing
Post by: john398 on April 16, 2016, 06:54:13 PM

never mind I forget I can just tie this together, last issue is the bill stacker, will try to buy a magazine as its missing

Title: Re: Bally EVO switches locks bypassing
Post by: john398 on April 21, 2016, 08:38:18 AM

ok got all sensor issued solved except service door, which I need to figure out what door that is

Title: Re: Bally EVO switches locks bypassing
Post by: shortrackskater on April 21, 2016, 09:24:27 AM

The lower unit, the "suitcase" has a door to access the CD rom. There might be a switch on that as well. And, if I recall there may be a switch above the entire unit.

Title: Re: Bally EVO switches locks bypassing
Post by: john398 on April 21, 2016, 10:02:31 AM

Thanks that was it the lower belly door

Now Though I Can't Get Out Of Demo mode. It's not showing any door errors but still stuck in demo mode

Title: Re: Bally EVO switches locks bypassing
Post by: shortrackskater on April 21, 2016, 11:16:02 AM

It's probably your settings. Go into the configuration screen and check. Here's what it should be. You can actually just enter just 1's for the ID and serial  number.

Title: Re: Bally EVO switches locks bypassing
Post by: john398 on April 21, 2016, 11:25:33 AM

Thanks I will probably have to do a clear ram again I belive I have all 0 instead of 1 I will look tonight