New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. => Topic started by: brooker on May 09, 2015, 09:58:55 PM

Title: bally v5500 hopper setting
Post by: brooker on May 09, 2015, 09:58:55 PM

hello i have a bally v5500.i want to use other kind of coin. a litter more small.. but the hopper dont paid this coin. stuck.. and when the coin come to the hopper knife. the coin stuck or jump.... i want to know is i can setting the hopper for paid any coin

Title: Re: bally v5500 hopper setting
Post by: CVslots on May 09, 2015, 10:10:38 PM

No. The hopper will need to be midwifed to process the desired coin size. If you can measure it in millimeters, we can then compare it to a US coin and Se what fit would be the best suited for you, as finding European coin shelves, etc may be an issue.

Title: Re: bally v5500 hopper setting
Post by: brooker on May 09, 2015, 11:02:05 PM

ok. check the pic. is the coin the hopper accept

Title: Re: bally v5500 hopper setting
Post by: Sunrise Side on May 10, 2015, 08:03:48 AM

What __mm is it ?

Title: Re: bally v5500 hopper setting
Post by: brooker on May 10, 2015, 08:20:38 AM

25mm

Title: Re: bally v5500 hopper setting
Post by: Sunrise Side on May 10, 2015, 02:40:28 PM

The US Quarter is 24mm. That will work for your 25mm conversion. You can find the US Quarter size conversion parts easily with vendors here on NLG.

Title: Re: bally v5500 hopper setting
Post by: brooker on May 10, 2015, 03:05:53 PM

The coin i want to use is 23 mm

Title: Re: bally v5500 hopper setting
Post by: Sunrise Side on May 10, 2015, 03:20:29 PM

The US Quarter coin handling parts should work in this case also. Only one mm difference.

Title: Re: bally v5500 hopper setting
Post by: brooker on May 10, 2015, 03:25:29 PM

If you have website, where i can buy post it,please