New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. => Topic started by: 61Wally on June 27, 2022, 04:36:06 AM

Title: S9000 printer (GEN2)
Post by: 61Wally on June 27, 2022, 04:36:06 AM

I’d like to get the correct answer to the setup of a GEN2 printer in a Bally S9000. I’ve seen this printer in many of these machines. When A person goes to put in a TITO and setup the printer type, The ONLY options are Future Logic, Ithaca 850 & 950. There’s also a CONFIG OPTION available. I’m trying to get All my programming issues answered before I “SPIN MY WHEELS” for 6 hours doing it over & over again. Does anyone have any suggestions on this matter. I know on some machines whatever is close by rebuilding these machines is installed to fill the gaps. Will this printer even work in a Bally S9000 “stars and bars” quick hit?

Title: Re: S9000 printer (GEN2)
Post by: 61Wally on June 27, 2022, 04:49:10 AM

I’m Sorry I’m still learning this site. I saw there’s a SPECIFIC section for printer issues. I will repost my ?

Title: Re: S9000 printer (GEN2)
Post by: sixcardmark on June 27, 2022, 06:44:25 AM

Select Future Logic for Gen2.  It must be RS-232 printer with firmware for Bally.

https://www.slotmachinepartsstore.com/online-store/Future-Logic-Gen-2-Printer-Bally-p73095565 (https://www.slotmachinepartsstore.com/online-store/Future-Logic-Gen-2-Printer-Bally-p73095565)