New Life Games LLC
Progressive Controllers and Displays => Mikohn Progressive Systems => Topic started by: mike311ga on August 04, 2014, 08:25:43 AM
-
Hello All:
Another question on cables.. I was able to make my serial cable, based on your excellent posts, however am stumped on how to find or make one for my J7 socket on the CHAM2+ to my IGT progressive connector on the machine. Any thoughts on how to create one, or where I can find one is much appreciated. This is my last step to have everything setup how I want it. Thanks much!
Mike
-
Here's how to make it.
-
Hi Ron, Thank You. I have this page from the manual, but I guess my question is around how I build a connector for either end, especially the J7.
I appreciate it.
-
I found the J-15 connector for the S-2000 connection from Mouser. Have not located the other connector, sorry.
http://www.mouser.com/ProductDetail/Molex/50-57-9406/?qs=%2fha2pyFaduh6M3JhjTACBxbJhR3F2Shy7veq0Qww8gJyUxVdQfYL2Q%3d%3d (http://www.mouser.com/ProductDetail/Molex/50-57-9406/?qs=%2fha2pyFaduh6M3JhjTACBxbJhR3F2Shy7veq0Qww8gJyUxVdQfYL2Q%3d%3d)
-
Thank You for the responses folks, I was able to procure an original cable from Slot Machines LTD. I used the email shotgun approach and got a hit. They were great to work with BTW, and I would recommend contacting them if you need a similar piece.