Bill Validators, Currency Acceptors and Printers > MEI Mars Bill Validators |
Device not detected |
(1/2) > >> |
Michael_Kauai:
Have an MEI Cash Flow in a IGT 960 BAR Top game, Game has been in operation for years, now say's Device not detected, changed out cash flow head and the "NIC" card, no change in game status. Used Banana downloader and downloaded latest IGT code for it. Took a known good MEI head and "NIC" from a game next too it and it still does not work. Any suggestions? Thanks |
rickhunter:
Does it get power? You might have a burnt trace on your motherboard that is preventing the validator from getting power. I would also check the harness. Check the green battery on the MPU make sure it is not leaking or damaging traces near it. |
Michael_Kauai:
Think I found the issue, the plug on the back plane where the Bill Acceptor plugs into was corroded, that's to some Coca-Cola glue. Will replace back plane, found this same issue at one of my other properties yesterday. So you're right, burnt trace or a surface circuit traveling through the coke syrup. |
Michael_Kauai:
Problem found, pictures of problem in this word DOC Thanks |
rickhunter:
WOW!!! That is some nasty gunk there. |
Navigation |
Message Index |
Next page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |