New Life Games LLC

Coin Comparitors and Other Coin acceptors => Coin Comparitors and Other Coin acceptors => Topic started by: 63mini on August 30, 2017, 09:48:27 AM

Title: CC-16D ID
Post by: 63mini on August 30, 2017, 09:48:27 AM

 I recently picked up a box of stuff and this comparator was in the group. I have been able to ID the others but, I did not see this one on the list and there is no game MFG part number on the back. The "R41-360K" reference throws me. I assume it is a replaced resistor value in R41.


 If possible I would like to know what game this would have been used in.  Thanks in advance!

Title: Re: CC-16D ID
Post by: erbs on August 30, 2017, 06:49:24 PM

I believe in a IGT S+.  If the 2 wires on the back side are gray S+ for sure.

Title: Re: CC-16D ID
Post by: RB on August 30, 2017, 07:01:38 PM

Aren't S plus comparitors 24V non inhibit? That one has green wires going to the actuator on back. Here's a link that might help:


http://newlifegames.com/nlg/index.php?topic=371.0 (http://newlifegames.com/nlg/index.php?topic=371.0)

Title: Re: CC-16D ID
Post by: RB on August 30, 2017, 07:16:22 PM

Here's a rundown of CMI numbers. Yours (66160043) is listed as being used in Sigma & WMS machines.

Title: Re: CC-16D ID
Post by: erbs on August 30, 2017, 07:21:57 PM

RB is right . Having the 2 green wires its not for the S+. My bad  :fryingpan:

Title: Re: CC-16D ID
Post by: 63mini on August 30, 2017, 07:58:27 PM

 Thanks, RB.  :cool_thumb_up: The list I was using was a .pdf and had about a third of the info as the .xls you provided.