New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Cleobud on May 03, 2023, 02:10:32 PM
-
Have an S+ with a WBA 13 and it suddenly will not light or accept bills. Using SP731. Used the SET chip and made sure the Bill validator was ON, and it was. Then I ran through all the settings with the white button and OPTION (0) 9 was set at 1 indicating the validator was enabled.
When the machine powers up the validator DOES set up like it always did, but then no light and it won’t accept bills. Any thoughts? Thank you.
-
Power supply, scanner head, or transport. If it is EPROM on the transport, you can swap another EPROM transport. Scanner heads are all the same, swap the head. Jim Midwest slots has WBA's and power supplies
-
Did you set the denomination? do the stand alone test to verify the unit is working, then go from there.
Jim
-
Too many credits on the machine?