New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: wmsbb2owner on October 21, 2015, 05:06:33 PM

Title: Alice topbox unit installation in a converted BB1.5 to BB2
Post by: wmsbb2owner on October 21, 2015, 05:06:33 PM

Alice top box unit installation in a converted BB1.5 to BB2. Need to know how to get power to the top box?  Can I skip the EMI filters and plug the top box directly into the H plug which is a DC plug?  [/size]Photos of the top box can be found here  [/size]https://www.icloud.com/sharedalbum/#B02GlxzuqEiAij (https://www.icloud.com/sharedalbum/#B02GlxzuqEiAij)[/font][/color][/font]


 :thank_you:

Title: Re: Alice topbox unit installation in a converted BB1.5 to BB2
Post by: rickhunter on October 23, 2015, 10:04:02 PM

Here's the the full story regarding the EMI filters and such.  The BB2 cabinet has a pair of the "BIG" 4 pin molex connectors that supply power to the monitors.  Because the Alice game only uses 1 monitor, the secondary monitor power plug is used to power the animator box.  The 4 pin "Big" molex connector will plug into one of the monitor power plugs.  The bracket with the EMI filters mounts somewhere in the back of the top box area.  You will notice that it has that ever so familiar 8 pin dual row molex which wms uses for all the bb1/bb2 cabinets to supply +5+12+24 volts to peripherals.  But only the +12 and +24 volts are wired, this plug is where the animator normally plugs in.  I suspect the EMI filters is to prevent interference from the little stepper motors working all the time to move about the little figurines.  For the record, the yellow wire provides +12 volts and the blue wire provides +24 volts.  Like it was stated by the OP, if you are running a bb2 converstion (that is running on a bb1 cabinet) the topbox distribution plate has a mating 8 pin molex connector that will supply power to your animator as is.  You do not need to connect the assembly with the EMI filters for it to work, but if you do, a harness can be made to connect the big molex plug to the "H" power connector in the top box distribution plate.

Title: Re: Alice topbox unit installation in a converted BB1.5 to BB2
Post by: wmsbb2owner on October 24, 2015, 12:39:48 PM

Plugging in to H works.   Thanks so much for the info

Title: Re: Alice topbox unit installation in a converted BB1.5 to BB2
Post by: rickhunter on October 24, 2015, 08:11:24 PM

I really like the Alice Box, I need to get one of those...  :applause: :applause: :applause: