New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: S6000 no display  (Read 2636 times)

0 Members and 1 Guest are viewing this topic.

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
S6000 no display
« on: May 31, 2023, 11:48:19 AM »
hi,
i just buy s6000 silver and gold, and when i power on i have no display in front and red led on mps flash every second!
i change battery, because it is died and i clear ram but nothing!!!!
look my dip switch on board there all in 1, it is strange???????
what is good configuration for this?
any else ideas???

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2568
  • Reputation Power: 164
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: S6000 no display
« Reply #1 on: May 31, 2023, 02:43:32 PM »
Flashing red LED means there is an error on the MPU board. Did you remove any chips? Chips in the proper direction? I would remove U28 and U43 and look for bent legs on the chips. Check the edge connector of the board for bent pins as well. If you find a chip in the socket that is in backwards , most likely the chip is burnt/toast.

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: S6000 no display
« Reply #2 on: May 31, 2023, 06:01:30 PM »
DSW2 should have some switches on and some off to set the proper options, DSW3 should have all switches on.
Let them that don't want any, have memories of not getting any.

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
Re: S6000 no display
« Reply #3 on: May 31, 2023, 06:47:30 PM »
thanks,
but every chips is in good condition, legs are good,everything look great!
peraphs ship are burned???
i have no idea!!!
do you thinks i need change mpu, or just ship u-28, u-43???

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: S6000 no display
« Reply #4 on: May 31, 2023, 07:53:30 PM »
send to my shop for test and repair?
Let them that don't want any, have memories of not getting any.

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2568
  • Reputation Power: 164
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: S6000 no display
« Reply #5 on: June 01, 2023, 03:57:50 AM »
As Alan mentioned , DS2 is not correct. Need to set your denom and BV on that Dip  and then do a clear. But I think you will need more than that to get it to work. You can send it to Alan - K-Lar. Post a picture of your machine.

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
Re: S6000 no display
« Reply #6 on: June 01, 2023, 06:37:46 AM »
This is picture of my machine

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
Re: S6000 no display
« Reply #7 on: June 01, 2023, 06:40:05 AM »
I can send my board but I’m in Montreal Canada!!

Offline a69mopar

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2104
  • Reputation Power: 83
  • a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.
  • Gender: Male
  • NLG
    • www.gtaslots.com
Re: S6000 no display
« Reply #8 on: June 01, 2023, 06:55:10 AM »
You can check your voltages at the backplane test locations.  Bottom left of backplane board.

Offline a69mopar

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2104
  • Reputation Power: 83
  • a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.
  • Gender: Male
  • NLG
    • www.gtaslots.com
Re: S6000 no display
« Reply #9 on: June 01, 2023, 07:03:22 AM »
From your hard to see board picture,  it looks like your main chips are in the wrong sockets. U43 looks to be in the u28 socket. Do you have separate saferam clear chips?

Thanks,
Wayne

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
Re: S6000 no display
« Reply #10 on: June 01, 2023, 08:02:51 AM »
Ok yes i have clear chip,
From your information u28 chips is front and u43 is on back!
I resend a better picture of board

Offline a69mopar

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2104
  • Reputation Power: 83
  • a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.
  • Gender: Male
  • NLG
    • www.gtaslots.com
Re: S6000 no display
« Reply #11 on: June 01, 2023, 08:20:30 AM »
In the clear picture,  they are correct.  In the blurry picture they look incorrect.  The marking on the board needs to match.  Putting them in incorrectly can render one of the pair bad.

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
Re: S6000 no display
« Reply #12 on: June 01, 2023, 08:25:56 AM »
Voltage are good and I just put a new power supply to be sure!!!
I search but ……. :fryingpan:

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
Re: S6000 no display
« Reply #13 on: June 02, 2023, 06:07:54 AM »
yes you are right my chips is mismatched!
i put i right place , i make clear ram, but nothing no display!
do you think this mistake died board or chips???????

Offline a69mopar

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2104
  • Reputation Power: 83
  • a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.
  • Gender: Male
  • NLG
    • www.gtaslots.com
Re: S6000 no display
« Reply #14 on: June 02, 2023, 06:41:21 AM »
If you have separate saferam clear chips,  you can try a clear with them.
Did you check the Connectors at the back of the board for bent pins? I have seen this a few times.

W

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
Re: S6000 no display
« Reply #15 on: June 02, 2023, 09:05:27 AM »
yes i try with clear chips, and no i check pin on board and on black plate everiting is good!

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2568
  • Reputation Power: 164
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: S6000 no display
« Reply #16 on: June 03, 2023, 04:11:18 AM »
Do you have another set of Leave in Clear chips U28 & U43 ?

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
Re: S6000 no display
« Reply #17 on: June 16, 2023, 07:26:10 AM »
i receive my news chip and it is samethink!!!!! :banghead:
i order un mpu board, i ll try with this! :banghead: :banghead: :banghead: :banghead: :banghead: :banghead:

Offline olivier34

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 30
  • Reputation Power: 2
  • olivier34 New User has no influence.
  • NLG
Re: S6000 no display
« Reply #18 on: June 17, 2023, 01:52:02 PM »
ok i receive my new card , i make clear chip!
every thing ok i put date,
and now i have a 91nc code!
any ideas?????

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2568
  • Reputation Power: 164
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: S6000 no display
« Reply #19 on: June 18, 2023, 06:57:01 AM »
On dip switch DS1 be sure all switches are on. if you are using "LEAVE IN CLEAR" chips, #8 switch will be in OFF position. If you change any dip switch settings , you have to do a clear.
« Last Edit: June 18, 2023, 07:36:32 AM by Sunrise Side »

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal