**Reel Slots** Gaming Machines > Universal Reel/Video Games

Universal slot machine help

(1/3) > >>

Yogibear:
Ok I just picked this machine up. The power supply looks nothing like I have seen in the post about Universal power supplies. It doesn't make a peep when I power it up. It only has one fuse that is good, it's mounted on the door. It has resettable breakers. I removed the noise filter as it was toast. Still nothing. I get voltage 120volts at the transformer but get nothing on the output side. Here are some pictures, thanks Chris.

Yogibear:
Also if I go buy the schematic it's not wired right. Wonder if I should change it? The 100v line isn't connected to anything.

UNIMAN:
You have a Narrow Power Supply. It maybe wired for 220v used overseas. I can't see all the connections in the pics.
Attached is the schematic for the Narrow Machine.

Yogibear:
I will go out this morning and take a better picture. Thanks Chris.

Yogibear:
Yes it was definetly wired wrong. I have it working now, but the hopper kicks out the breaker. Only when it's grounded in the cabinet though. If it's setting outside not touching anything it doesn't short the breaker, but doesn't move either. So must be the wiring isn't right yet. Thanks Chris

Navigation

[0] Message Index

[#] Next page