New Life Games LLC

TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Slot Toppers => Topic started by: slotdoofus on October 18, 2016, 02:44:10 PM

Title: Bally S6000 topper connection instructions?
Post by: slotdoofus on October 18, 2016, 02:44:10 PM

I bought a topper for a Bally S6000 a while back...finally getting around to installing it.

Which plug goes where?

I have a 4 pin plug marked LED controller.
I have another 4 pin plug marked tower interconnect
I also  have a 2 pin plug marked game power.

This topper also came with a 12 to 24 VAC converter that has a potentiometer on the side of the box. What is this for and how is this connected in the installation?

The 12 to 24 VAC has 2 connectors...a 2 pin plug, and a 4 pin plug.

Title: Re: Bally S6000 topper connection instructions?
Post by: Hamburger4378 on October 24, 2017, 04:08:48 AM

Were you able to figure this out? I got one and I'm  reading I need  24v and a 6v power  adapter to power thr lights up, but I'm  not sure what amps they can be.

Title: Re: Bally S6000 topper connection instructions?
Post by: slotdoofus on October 24, 2017, 04:29:23 AM

No,

I abandoned this project.