New Life Games LLC
Homebrew Player Tracking and EFT Systems => NLG Homebrew Player Tracking and EFT Systems => Topic started by: morspeed on December 14, 2017, 10:25:22 PM
-
I got an Aristocrat system that was working in a machine when I pulled it out. Apparently I left part of the power connector in the machine it came out of. I thought I pulled the power supply (pictured below) that was hooked to it out. But when I went to install it in my machine I quickly realized that the power input is a for pin molex and not a standard power supply hook up. So I had a four pin power harness (pic below) that has 12v and 24v and used it to plug in and the machine power supply would not turn on. It went into a safety like there was a short. So I took out the unit and got a 12 volt power supply to test hook up the unit on the bench and any combination of the 4 pins connected would short the power brick. The brick is good. I am wondering if I am missing something and if anybody knows what connection I need. There are four pins for that 12v labeled input. Does it use all 4? Pics are below of the system and power input.
-
Colin Hayes with Hayes International has all of the parts for these Sentinel units, if you need anything reach out to him. Seeing all of these TITO solutions out here using Bally MasterCom I feel these would be great additions to the HomeBrew project for machines newer than the old IGT eg: S2000's etc.
I have these units in all of my slot machines they don't function but the screens pretty much show the images from the casinos they came from.