New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: Nepa Coin Op on November 11, 2018, 10:14:14 PM
-
i have another GM v7000 here i got with no hopper.... im gonna just set it up coinless.... anyone know what to jump on the hopper plug to eliminate hopper jam errors when its looking for a hopper ??
thanks
-
Here are my solutions.
BALLY HOPPER ELIMINATE
JUMPER 6 & 10 ON HOPPER SIDE
OR:
ON 26 PIN 2X ROW PLUG JUMPER PIN 12 TO 19
RUN WIRE FROM PIN 4 OF 26 PIN PLUG TO
PIN 4 OF THE 8 PIN MOLEX CONNECTOR
KEY WAY IS AT 6
-
Here are my solutions.
BALLY HOPPER ELIMINATE
JUMPER 6 & 10 ON HOPPER SIDE
OR:
ON 26 PIN 2X ROW PLUG JUMPER PIN 12 TO 19
RUN WIRE FROM PIN 4 OF 26 PIN PLUG TO
PIN 4 OF THE 8 PIN MOLEX CONNECTOR
KEY WAY IS AT 6
still getting a hopper jam error after the jump
-
Error could be backed up in software, try a clear chip and start over.
Select "hopper none".
-
Mains I have dont give the option to choose hopper on or off but I have it jumped and the error is now gone, booted right up to demo mode n plays fine........only other issue I always have with GM's is after a clear I can never get the 10th game to show up in the menu.... after doing the clear i reset dips, reboot, set max bets, reboot with 10th game chip in it then asks me to cycle key a chip was changed but never adds the new game into the menu.... obviously im doing something wrong in that process
-
Some mains, M0-M1, only allowed 9 games.
-
That’s what’s in it an M0-M1 set
-
They all have M0-M1-G0-G1 the numbers on the chips vary from bar games to upright games to slant wide screen.
To clear demo mode go to terminal ID and enter 11111111111111111 then hit CR