New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Like2know on March 18, 2014, 02:48:24 PM

Title: Power Supply is only putting out 1/2 of what's needed
Post by: Like2know on March 18, 2014, 02:48:24 PM
Where is the best place to get a Power supply for a S-Plus  machine. 110v or is it possible just to get the transformer that is what burnout.?  Any information would be helpful because radio shack is only thing I have Here and I don't think they have one in stock:} Power Supply testing of volts from the front at that fuses.  I have three fuses holders the top one.is 24v I use a volt meter and tested it where the fuse goes.  And my reading was only 11 volts.  The other two fuses tested OK.  Only the 24 v was only putting out 1/2 is this normal?  I have a IGT S-Plus with 1048 chip, 110 v               :thank_you:

po4mail@sbcglobal.net
Title: Re: Power Supply is only putting out 1/2 of what's needed
Post by: foster on March 18, 2014, 07:39:25 PM
I would test at the motherboard connection from the power supply
If you are getting 8-10V AC and 24V AC you should okay.

Also the power supply in the S+ only outputs AC and is not regulated
All the AC is converted to DC on the MPU


Title: Re: Power Supply is only putting out 1/2 of what's needed
Post by: Like2know on March 19, 2014, 10:37:06 AM
 Finally somebody replied Thank you all check it out and let you know thanks again
SimplePortal 2.3.5 © 2008-2012, SimplePortal