New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: Tacman on February 08, 2014, 08:45:20 PM
-
Topic: bally gamemaker stuck in demo mode
kenokarz
bally gamemaker stuck in demo mode
« on: October 02, 2007, 08:43:15 PM »
--------------------------------------------------------------------------------
why is my bailly gamemaker stuck in demo mode, i did a full clear on p 10, also when it went to set up IT asked for the juristion setting,
i selected #1 it also asked for the EFT i disabled it still after all of this its still stuck in demo mode ??????
Brianzz
Re: bally gamemaker stuck in demo mode
« Reply #1 on: October 02, 2007, 10:17:22 PM »
--------------------------------------------------------------------------------
Did you set up denom and everything?
ricker
Re: bally gamemaker stuck in demo mode
« Reply #2 on: October 02, 2007, 11:15:23 PM »
--------------------------------------------------------------------------------
Hey Hey. You must give it a terminal id under configuration(far right colum top choice). I just keep punching 1's(9 times) until the red save square (http://newlifegames.net/nlg/index.php?topic=158.0#) lights up. Press yes and waalah!
Richard
kenokarz
Re: bally gamemaker stuck in demo mode
« Reply #3 on: October 03, 2007, 05:11:52 AM »
--------------------------------------------------------------------------------
never tryed that i will give it a go tonight do i need a full p 10 ram clear ???
ricker
Re: bally gamemaker stuck in demo mode
« Reply #4 on: October 03, 2007, 07:52:11 AM »
--------------------------------------------------------------------------------
No ram clear needed. Just need to fool machine into thinking it can communicate with a host system, which doesn't exist. Richard
Re: bally gamemaker stuck in demo mode
Here are the detailed clear instructions.
-
Its now also coming up game disabled printer fault..
-
Did you get your Gamemaker out of demo mode and the Printer fault? I am experiencing the same issue
-
Now you have to clear it again and select PRINTER - none
-
I am trying to get this game going for my father in law who lives 50 miles away. I am going tomorrow to check on him and will try it then. thanks for the help. I will keep you updated
-
I have had this problem before. As mentioned above you have to set terminal ID. Fill in with all ones until the red save box comes up. Press yes and you should be good.
-
Do I have to reset the terminal ID everytime I do a ram clear
-
yes
-
I am out of demo mode,thanks. How do I disable the printer. I started a new post that has a picture of the screen
-
Normally (99% of the time) that option is found during the initial setup after a clear.
Turn your key switch with the door open and see if there is a printer option there.
-
I have tried with the door open and closed. Maybe I am just missing it. Thanks