New Life Games LLC
Progressive Controllers and Displays => Mikohn Progressive Systems => Topic started by: qbert on March 22, 2014, 11:49:20 AM
-
:59-I really am con fused I think a manual will help :103-
Hopefully this will help...
Jimmy
Don't be afraid to ask questions, the programming of a Cham2+ can be a real pain sometimes!
Here's a lesson I learned on my Cham2+; If your downloading a text message to be displayed on the meter, download immediately after the Cham2+ boots up and your success rate will greatly improve!
I just realized on the mother board the cable I have going from mikohn cham2+ will not fit in the board where it says progressive :52- :103-
FYI The S2000 actually has 2 progressive ports
One on the motherboard and one on the Comm board that is the board in the middle of the AC Dist box mounted on the back wall with a ribbon cable between it and the motherboard
Both Progressive ports work the same way and are the same style connector, a 6 pin Molex SL 0.100" connecter
The S+ and S2000 both use the J7 connector on the Cham II+ a 14 pin version of the ATA (PATA) Connector on Computer Motherboards, it also has 0.100" spacing
Please post a clear picture of the harness and try to a good close up of the connectors when doing it.
Hey thank you so much for the info do you know where I can purchase the cable
MAny of us that have a S2000 and a Cham II+ made our own cables.