New Life Games LLC

**Reel Slots** Gaming Machines => Other Reel Games => Topic started by: brokenticker on June 14, 2020, 11:53:37 AM

Title: FIXED !!Aruze inovator reset info needed
Post by: brokenticker on June 14, 2020, 11:53:37 AM

Looking for reset procedure for king of dragons ||| , acuze inovator 5 reeler, already changed all 7 batterys, was able to clear ram and shows memory cracked and locks up there, thanks

Title: Re: Aruze inovator reset info needed
Post by: brokenticker on June 19, 2020, 05:10:48 PM

bump still looking to see if anybody has any info on these machines , thanks

Title: Re: Aruze inovator reset info needed
Post by: Paul on June 19, 2020, 07:22:31 PM

This what I found on the Delphi web site for your machine -

From:    The_laneman   6/20/18 3:17 AM
To:    420tech     (1 of 7)
    16772.3 in reply to 16772.2


Trying to clear a backup memory cracked.

I can get the machine to the point where it gives me the option of "cancel" or "clear" I turn the key clockwise (toward "audit")Doesn't clear the ram.

I tried ram clearing on the gmem board with the switch..that wont clear it either.

All brand new batteries.
    
From:    420tech   6/20/18 11:20 PM
To:    The_laneman     (2 of 7)
    16772.2 in reply to 16772.1

How long did you wait for the memory cracked? I've had to wait damn near 40 minutes for one of those games to go past that.
     

    
From:    The_laneman   6/21/18 3:17 AM
To:    420tech     (3 of 7)
    16772.3 in reply to 16772.2

Mine keeps rebooting.It gets to the screen I posted and waits for about 30 seconds then reboots.

Did yours keep rebooting also?


    
From:    420tech   6/21/18 3:30 AM
To:    The_laneman     (4 of 7)
    16772.4 in reply to 16772.3

No, the game shouldn't be rebooting. This is a GeneX cabinet, right? If so, try this: pull the batteries and let it sit for about 30 minutes without them. After 30 minutes, put the batteries back in and try it again.

Also, check the caps on the video card & the main board. They're known to have bubbled caps.
 


    
From:    The_laneman   6/21/18 4:05 AM
To:    420tech     (5 of 7)
    16772.5 in reply to 16772.4

It is a GeneX correct.

Which batteries do you want me to pull.The ones on the gmem board?The body and door ones also?

 

Thanks for your help so far


Try AmazonFresh Free Trial
    
From:    420tech   6/21/18 5:32 AM
To:    The_laneman     (6 of 7)
    16772.6 in reply to 16772.5

I usually pull all 3 from the cpu. The one on the mainboard(motherboard), the one on gmem board, and the one on the small pcb attached to the outer cpu box door.

If this doesn't work, and there are no bubbled caps to replace, then you might have to get a Master Reset dongle from Aruze. We had to get one for a game that we couldn't ram clear with the method that you're trying. It looks like the blue game dongle, just remove game dongle, plug it in, and follow directions on the screen.

    Edited June 21, 2018 5:47 am  by  420tech

 
    
From:    The_laneman   6/21/18 10:25 AM
To:    420tech     (7 of 7)
    16772.7 in reply to 16772.6

I tried what you said..no go.

Im going to have to get the Master Reset cassette for this one.

Have to see if anyone has a extra one that they want to sell.

Thanks for your help

If you are changing games or installing a new CPU you may need to order the all clear cassette from Aruze to do so.

Title: Re: Aruze inovator reset info needed
Post by: brokenticker on June 19, 2020, 08:52:07 PM

I saw that too, I can clear ram but that's it, screen just freezes there and says memory cracked, thanks for looking paul ,

Title: Re: Aruze inovator reset info needed
Post by: Paul on June 20, 2020, 06:46:28 AM

You then need to order the all clear cassette

Title: Re: FIXED !!Aruze inovator reset info needed
Post by: brokenticker on June 21, 2020, 06:46:18 PM

Fixed THANKS Irish2020, No clear card needed , just had to wait alittle longer after ram clear for setup screen to come up :thank_you: