New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Nepa Coin Op on June 27, 2023, 02:57:50 AM
-
I have a UBA here I was flashing and as the program started dumping the file, the program disconnected, I could hear the usb disconnect tone, previous to that the unit booted cycled ect, now it does nothing, wont cycle or connect to the pc, anyway I can correct this or is it toast???
Thanks
-
Have you tried a Forced Download
-
Have you tried a Forced Download
im not familiar with that process....
The PC does not recognize it plugged in, how would I go about forcing a SW update ??
I did reinstall my tool suite in case that was corrupt still have the same scenario
-
Dip Switch 6,7,8 in the Up position the power up
-
Dip Switch 6,7,8 in the Up position the power up
That got it up and going
THANK YOU !!!!!!!
-
:applause: welcome