New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Fisk167 on July 24, 2016, 03:07:56 PM

Title: WBA 13 Power Supply For IGT S+
Post by: Fisk167 on July 24, 2016, 03:07:56 PM

What would be the proper Power Supply For the WBA13 being installed in a IGT S+ that has the vented DBV 200 power supply. I have seen a few listed for sale and they have different plugs. Tks

Title: Re: WBA 13 Power Supply For IGT S+
Post by: Shaggy on July 24, 2016, 04:01:16 PM

Check with the vendors on the home page for a power supply for a  WBA 12/13 for an IGT S+.

Title: Re: WBA 13 Power Supply For IGT S+
Post by: Fisk167 on July 30, 2016, 05:53:57 AM

Does anyone know what is the proper power supply for the IGT s+. I'm having a hard time verifying the correct one. I have a WBA13ss for IGT. I believe the power supply for the wba 10/11 is different then wba 12/13, lower amp rating on the wba 10/11. If someone has done the conversion before and can share some info would be great. I found some pics of one and I'm not sure if its correct . I will post them below

Title: Re: WBA 13 Power Supply For IGT S+
Post by: rickhunter on July 30, 2016, 06:19:24 PM

The wba 10/11 and 12/13 use the same power supply.  The curren (amperage) issue is going from a dbv145 to a dbv200.  The power supply shown on the photo you posted is the correct one for all wba validators.