New Life Games LLC

NLG Classified ads and White Sheet => Requests for PSRs, technical information. => Topic started by: IGT on June 08, 2014, 07:32:30 PM

Title: How to backup/restore software
Post by: IGT on June 08, 2014, 07:32:30 PM

I put together the following document for backing up and restoring IGT software.  If this is not appropriate to post, then please, by all means, remove as you see fit.  If not, I would welcome any corrections.  Thanks

Title: How to backup/restore software
Post by: Badbaud on June 08, 2014, 07:55:34 PM

How to backup Fortune 1 software.

Find an old Data I/O programmer.

Read the tri voltage 2716 into the data pro.

Program a single voltage 2716 with the data.

Save the single voltage data onto the computer with a more modern EPROM reader / programmer.

Reverse would be program a single voltage EPROM with the saved bin.

Read it into the Data I/O programmer.

Program a tri voltage EPROM with the data.

Title: Re: Attn Moderators - is this appropriate? How to backup/restore software
Post by: Badbaud on June 08, 2014, 10:09:14 PM

Getting those tri voltage EPROMs onto a computer are difficult because most burners that connect to a computer don't read tri voltage EPROMs.

Title: Re: How to backup/restore software
Post by: IGT on June 11, 2014, 09:11:55 AM

Thanks Badbaud.  Perhaps this information will be useful for anyone new in the market of simm and/or eprom backups.

Title: Re: How to backup/restore software
Post by: Craig007 on June 26, 2014, 02:09:10 PM

Thanks for this information!   :hail:

Title: Re: How to backup/restore software
Post by: IGT on June 26, 2014, 06:59:21 PM

Thanks to CoorsLight, revision # 3. 


S2000 Stepper Version (VS) chips are 27C1001 or 27C010.  Updated on page 2.

Title: Re: How to backup/restore software
Post by: tquick17 on June 25, 2023, 07:18:05 AM

Good read thank you. I winged my backup lol but this would of helped. Will use for future reference