New Life Games LLC

Monitor Repair Log and Database. **Arcade and Gaming** => LCD and CRT Monitor Repair Tech Support => Topic started by: Rcksasha on July 20, 2020, 08:18:21 AM

Title: test and rebuild P&M poker Coin machine, with an RGB Display
Post by: Rcksasha on July 20, 2020, 08:18:21 AM

i am looking for someone to test and rebuild a p&m poker machine with an rbg display. please let me know of anyone.

Title: Re: test and rebuild P&M poker Coin machine, with an RGB Display
Post by: Amechanic on July 20, 2020, 09:48:58 AM

Hope you have better luck then I did. I have 3 P&M coin machines. I put new caps on 2 of the 3 chassis, only to have then go from powering on very slow, to being dead?? No smoke, nothing burnt? From what I’ve been able to tell, I believe there is a small video chip on a card mounted to the chassis that must be failing. That part can not be found any where?

Title: Re: test and rebuild P&M poker Coin machine, with an RGB Display
Post by: Sunrise Side on July 20, 2020, 06:08:22 PM

Might want to check into getting a $15 converter board and change it to a 13"  or 14" LCD. Lot of arcade  guys doing this due the lack of CRT techs.

Title: Re: test and rebuild P&M poker Coin machine, with an RGB Display
Post by: Rcksasha on August 02, 2020, 08:59:48 PM

Can you please help me woth that. That would be amazing if you can help me find those part.

Title: Re: test and rebuild P&M poker Coin machine, with an RGB Display
Post by: Sunrise Side on August 03, 2020, 06:36:46 PM

I have not done this myself.  You will have to research it.   https://www.ebay.com/itm/253407215602 (https://www.ebay.com/itm/253407215602)

Title: Re: test and rebuild P&M poker Coin machine, with an RGB Display
Post by: Rcksasha on August 08, 2020, 01:58:50 PM

ok i have the convertable board just need help with the wiring part.