New Life Games LLC

Coin Comparitors and Other Coin acceptors => Coin Comparitors and Other Coin acceptors => Topic started by: Midcoastsurf on August 27, 2015, 09:33:06 AM

Title: What voltage and model comparitor for my Bally S5500?
Post by: Midcoastsurf on August 27, 2015, 09:33:06 AM: I can't seem to find this info in the manual or near where the comparitor should be. I'm looking for a nickel comparitor, I just don't know what model and voltage I need to get.

Is it best to measure the plug that goes into the comparitor to see what voltage it's throwing out?

Thanks!
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: Sunrise Side on August 27, 2015, 05:57:15 PM: Mine has a CC16-D which I believe is a multi voltage. It has the Grey wires going to the magnetic coil on the back side.
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: RB on August 27, 2015, 06:28:55 PM: Here is a pdf I saved from the old site. I'm sure it may have omissions, possibly even mistakes but it might help point you in the right direction if you figure out the voltage. I am not "Bally Smart". Most of my experience has been with IGT machines. Good luck.
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: buybestslots on August 27, 2015, 07:33:48 PM: 24 volts dc grey wires
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: Midcoastsurf on September 03, 2015, 12:26:16 PM: Here are pics. There is one gray wire with a stripe.
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: Sunrise Side on September 03, 2015, 12:33:35 PM: If you get a CC16 D which fits your connector in your pic , your good to go.
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: Midcoastsurf on September 03, 2015, 12:49:10 PM: Quote from: Sunrise Side on September 03, 2015, 12:33:35 PM
If you get a CC16 D which fits your connector in your pic , your good to go.

CC-16D in 24 volts, correct? Thanks!
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: Sunrise Side on September 03, 2015, 01:17:56 PM: (https://newlifegames.com/nlg/proxy.php?request=http%3A%2F%2Fna.suzohapp.com%2Fimages%2F30%2F35012100.jpg&hash=14523e0adfd1ef4530444d65564bdb1899436689)
(https://newlifegames.com/nlg/proxy.php?request=http%3A%2F%2Fnewlifegames.net%2Fnlg%2Findex.php%3Faction%3Ddlattach%3Btopic%3D9636.0%3Battach%3D25799%3Bimage&hash=c1638af4cd9b5bf73be0c8f642ac445951e63b22)

CC16 D is multi voltage ( 12, 13, 24 volt )
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: Midcoastsurf on September 03, 2015, 01:59:04 PM: Ask the voltage adjusts automatically?

I guess my question is, as long as it's a CC-16D, it doesn't matter what voltage people say it is?
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: Sunrise Side on September 03, 2015, 02:52:23 PM: Your harness that connects to the comparitor will be connected to the proper voltage taps.
Title: Re: What voltage and model comparitor for my Bally S5500?
Post by: Midcoastsurf on September 03, 2015, 03:16:44 PM: Thanks a lot for the help and pictures. Really appreciated!