New Life Games LLC

**Reel Slots** Gaming Machines => IGT S-AVP (REEL SLOTS ONLY, NO VIDEO) => Topic started by: edbcool on October 18, 2015, 08:14:35 AM

Title: avp no power to cpu
Post by: edbcool on October 18, 2015, 08:14:35 AM

I have a avp. the pins on the power supply for 13 volt burnt up replace with another harness and power supply. got voltage at daughter board . cpu still wont fire up. need help please

Title: Re: avp no power to cpu
Post by: jonm287 on September 16, 2016, 05:48:03 AM

I realize this is an old topic, but I did want to share a tidbit of info in case anybody else runs into this problem.  On AVP 3.0(m) brainboxes, and probably others (625s for example) if the CMOS battery goes dead and you cycle power on the game, it will prevent the brainbox from booting.  It'll just flash quickly on the interface card and that'll be it.  You'll usually get a warning in the form of a soft tilt saying battery voltage low.  The battery is a regular CR2032, and as soon as you replace it the brainbox will boot up again no problem.