**Reel Slots** Gaming Machines > IGT S2000 and Vision Games |
S2000: Disconnecting the Hard or Physical Meters |
(1/1) |
foster:
This is how to quiet the physical meters Many thanks to CaptainHappy Do not just unplug them, doing so will cause a Meter Disconnect tilt. Parts list: Short piece of Wire or the like to act as a jumper Unplug harness going to the meters Locate pins 9 and 10 in the connector Pin 1 is designated by a small arrow on the connector - yes it is small. the wire colors you are concerned with are: 9 Brown with gray stripe 10 Black with orange stripe Insert a jumper between pins 9 and 10 in the harness Apply a bit of electrical tape to hold the jumper in place or you might get random meter disconnect tilts. You can also cut the two wire and splice if you so desire. |
SlotMechanic:
I just used a small paper clip... It fit real nice into the connectors... I put a peice of electrical tape as to what foster said....works great... No more constant noise. |
Navigation |
Message Index |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |